Miniz hydro pump

Discussion in 'Hustler Turf Equip (Archived)' started by BaxtersEssentialLawnCare, Apr 18, 2012.

  1. BaxtersEssentialLawnCare

    BaxtersEssentialLawnCare LawnSite Senior Member
    Posts: 299

    I need to replace the a nut on my hydro pumps need help on the size. It is the nut that you would loosen if you needed to move the mower and it would not start. There is one on each pump right next to the line on the front side. Any one know the part # and size. The previous owner cross threaded it and I need a new nut I'm also going to have to sleeve the hole in the pump just need the sive to order the correct sleeve.

    Thanks Rick
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,760

    Nut?
    Not quite sure there is a nut for what your explaining.
    What is your model and serial #, then I can look up your hydro information.

    Pj
     
  3. BaxtersEssentialLawnCare

    BaxtersEssentialLawnCare LawnSite Senior Member
    Posts: 299

    Thanks pj at the time I wasn't sure what it was called. Its the bypass valve. I got lucky was able to get the it off clean the threads up and get it back in.
     

Share This Page