More fun than I should be allowed to have.

Discussion in 'Landscape Lighting' started by starry night, Dec 5, 2012.

  1. starry night

    starry night LawnSite Silver Member
    Posts: 2,600

    When I first got into lighting a year ago, it was suggested by someone on this forum that once I got started, I would choose to forget all about doing general landscaping.

    Today, it was only about 35 degrees with a little breeze added for nip, (although sunny), while I was working on redoing the lighting on a beautiful estate.

    I ripped out old, wet Hxxxo in-ground lights, old wiring with pierce point connectors, an old XXX transformer that was putting out more than 13.5 volts from a 124-volt primary. I had to maneuver under a weeping Japanese Maple which draped to the ground and try to dig an 18"-deep hole with my soil knife in a corner behind the tree to place a new transformer mount.

    There's still lots more to be done, but after dark with a few lights complete, I was able to see what I had achieved. Work? This is way too much fun!
     
  2. TruSomethingOrOther

    TruSomethingOrOther LawnSite Member
    Posts: 171

    I have been slowly rewiring my old house from knob and tube to romex. It's been a little frustrating at times, but overall I love playing with electrical. Good to hear you're shedding a light on your passions.
     
  3. Lite4

    Lite4 LawnSite Gold Member
    Posts: 3,109


    Yep, it's not a bad way to make a living :)
     
  4. Steve Atkinson

    Steve Atkinson LawnSite Member
    Posts: 94

    Tim,

    You asked about where to buy Simply Automated.

    ADI on Wales Ave in Indianapolis sells! Electronics/datacom-type store, should have some stock and can order for you as well.

    Let me know if you want to talk about how to setup and use. Very easy.
     
  5. Lite4

    Lite4 LawnSite Gold Member
    Posts: 3,109

    Thanks for tracking that down Steve, I will go by and see what they stock.
     

Share This Page