1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

mulching blades

Discussion in 'Lawn Mowing' started by LARSON, Feb 27, 2001.


    LARSON LawnSite Member
    Posts: 10

    Any imformation on mulching blades? Whats the best brand?
  2. Eric ELM

    Eric ELM Husband, Father, Friend, Angel
    Posts: 4,831

    Most all members here are using two blades on each spindle. I use a Gator blade and a high lift blade most of the time. I put the Gator blades on the bottom and the high lift on top. Most run them just the opposite as me. If you haven't read about doubles, you can read the article on my website on this topic. There are hundreds of posts on this subject too on my Lawnsite search page. I hope this helps.
  3. Mowman

    Mowman LawnSite Senior Member
    Posts: 553

    I use a blade called Gator. Also use one called Atomic. Gator blades I use on my Walker SD and the Atomic on my Toro walkbehind. They work very well on tall grass and totaly destroy leaves in the fall, saves on alot of raking. Hope this answered your question.
    Good Luck,

    MIDSOUTH LawnSite Senior Member
    Posts: 320

    I use gators and elimators doubled together.

Share This Page