My new skid sprayer!

Discussion in 'Pesticide & Herbicide Application' started by inzane, Sep 16, 2013.

  1. inzane

    inzane LawnSite Silver Member
    Posts: 2,365

    i have always used the lesco chemlawn guns, wouldn't use anything else really. pretty solidly built, and great coverage.


     
  2. inzane

    inzane LawnSite Silver Member
    Posts: 2,365

    this is after i got the lettering done a few weeks ago.

    fb.jpg
     
  3. Dylan's Lawn Care

    Dylan's Lawn Care LawnSite Member
    Posts: 122

    What pump are you using?
     
  4. KrayzKajun

    KrayzKajun LawnSite Fanatic
    Posts: 10,742

    Truck looks really good. I did like the frog in the logo too.
    Posted via Mobile Device
     
  5. inzane

    inzane LawnSite Silver Member
    Posts: 2,365

    this......

    dva.jpg
     
  6. Dylan's Lawn Care

    Dylan's Lawn Care LawnSite Member
    Posts: 122

    What psi does your pump run at when your spraying?
     
  7. CHARLES CUE

    CHARLES CUE LawnSite Silver Member
    Posts: 2,091

    I can't speak for Inzane but I have one with a fatboy pump. No mater the pressure you have once you pull the trigger on the spray gun 40 psi at the gauge, at the end of the hose I would say 15 lbs or less.
     
  8. DA Quality Lawn & YS

    DA Quality Lawn & YS LawnSite Fanatic
    Posts: 8,869

    100 gal of mix and 30 bags of fert? That'll squat that 1/2 ton down to the axle.
     
  9. inzane

    inzane LawnSite Silver Member
    Posts: 2,365

    lol.. i'd never do that. when i'm doing granular, the tank is just about empty or just enough water to fill up the backup sprayers every now and again. if i need that much fert it will be going on a trailer. if i had a need for that much materials each day i'll have a 2500hd by then.

     
    Last edited: Apr 22, 2014
  10. inzane

    inzane LawnSite Silver Member
    Posts: 2,365

    i have no pressure gauge, so not even sure. I spray at 1.5 gpm . I like this pump.. i did tear the diaphragm one day when i got out there and it was a little to cold. I like that they are easy to fix. i bought one of the 7gpm delevan fat boys with a pressure switch as a backup too.

     

Share This Page