Need a Quick Answer! Thanx

Discussion in 'Lawn Mowing' started by RB, Mar 21, 2001.

  1. RB

    RB LawnSite Senior Member
    Posts: 306

    Will a 48" lazer w/ultra vac fit on a 60" wide trailer (I have 60" to work with)?

    Thanx.
     
  2. bob

    bob LawnSite Platinum Member
    from DE
    Posts: 4,254

    According to the Exmark catalog, page 25, a 48" Lazer with an UltraVac is 61.73 inches wide.
     
  3. Scraper

    Scraper LawnSite Bronze Member
    Posts: 1,656

    But if you ahve an open trailer, this may fit as the widest part may be above your siderails...
     
  4. bob

    bob LawnSite Platinum Member
    from DE
    Posts: 4,254

    Also if you have an open trailer, the mower deck might be able to fit between the trailer floor and the top of the side rails.
     
  5. RB

    RB LawnSite Senior Member
    Posts: 306

    Thanx guys - good points!
     
  6. John DiMartino

    John DiMartino LawnSite Silver Member
    Posts: 2,555

    RB,you might be able to back the mower on at a angle to get it on,or how hard is it to pull the chute?My Dixie 60" just fits on mu 78" wide trailer with the trac-vac on,Ive got an inch on each side.How you like the new F450?
     
  7. Runner

    Runner LawnSite Fanatic
    Posts: 13,494

    It takes about 1 minute to disconnect the blower of the side of the deck on the Ultra Vac. You can leave the bags on.
     

Share This Page