need advice on cobblestone

Discussion in 'Hardscaping' started by oakhillslandscaping, Sep 4, 2008.

  1. oakhillslandscaping

    oakhillslandscaping LawnSite Senior Member
    Posts: 643

    hey guys i was looking for some advice, the other day i was asked to do a cobblestone driveway or half the driveway depending on the price, however i am torn on how to install the cobbles do i lay them and concrete and be at the risk of the salt from the winter wearing away the concrete or should i use a poly sand? any other options that i am missing? thanks for what you can give me in advance
     
  2. Marbleman

    Marbleman LawnSite Member
    Posts: 14

    Maybe you could convince you client to go with a tumbled paver that has the look of cobblestone. It would be easier and quicker to install, you would just need a thicker base than a normal patio.
     
  3. sven1277

    sven1277 LawnSite Senior Member
    Posts: 643

    Cobble stones a time consuming to install because the sizing is approximate. Each stone will need to be individually set. Plowing will also be difficult. Also, they have become really expensive. 2 years ago, I was buying jumbos for $3 each. Now they are $5.50. If you set them in concrete, you better have a 98% compacted base of 10-12", otherwise you will have a lot of cracking. I agree, tumbled pavers are a much better direction, even for a high end historic house. I wouldn't recommend doing the job if you are not experienced in pavers, especially a driveway.
     
  4. amscapes03

    amscapes03 LawnSite Senior Member
    Posts: 398

    Unilock has a paver called "Courtstone". Check it out. Unilock.com
     
  5. amscapes03

    amscapes03 LawnSite Senior Member
    Posts: 398

    Use "Gator Dust" in the joints. Alliancedp.com
     
  6. Ajax

    Ajax LawnSite Member
    Posts: 31

    Courtstone is nice stuff. Just be prepared to use alot of polysand because the gaps are large. They will probably reccommend the "HP" polysand for the bigger gaps.
     
  7. JimmyStew

    JimmyStew LawnSite Senior Member
    Posts: 367

    Wow, I can't believe the bad press the cobblestone is getting. If your customer wants real cobblestone, sell him real cobblestone. I'm not familiar with all of the different paver mfg. but the ones I am, do not produce anything that realistically compares with true granite cobbles. It is a one of a kind look, and well worth the trouble and expense of installation.
     
  8. Captains Landscape

    Captains Landscape LawnSite Senior Member
    Posts: 333

    Use granite cobbles and set them individually as mentioned. Ignore the comments about using ICP to replicate Belgium block. 80% of homes in my area have cobblestone entry aprons at the foot of the driveway. Snow removal is of no issue. Your finished product should be level and smooth as pavement. Look for a stone yard that stocks the most uniform cobbles. Try Swenson Granite.
     
  9. oakhillslandscaping

    oakhillslandscaping LawnSite Senior Member
    Posts: 643

    thanks captains landscaping should i do tight joints like pavers with them or should i lay them in mortar
     
  10. Captains Landscape

    Captains Landscape LawnSite Senior Member
    Posts: 333

    I dry-set them in 10-12” of compacted aggregate base (reprocessed asphalt / dense grade) compacted in lifts. Joints are as tight as the variance in the stone will allow while keeping a straight bond. Joint material is of no large significance. We use stone dust simply for aesthetics.
     

Share This Page