Need help from 72-93 dodge owners

Discussion in 'Trucks and Trailers' started by Edgewater, Apr 8, 2008.

  1. Edgewater

    Edgewater LawnSite Senior Member
    Posts: 457

    Hi,

    I am putting a 1992 dodge d-250 back together. It is obvious from the paint marks, the the front fenders go inside the front skirts or inner fenders. that is how it was when I took it apart.

    IE when you look at the truck, you see the lip on the fender, and then sticking down below that and overlapping by about 1/2 the width, is the inner fender or skirt.

    Is that correct, I cant imagine that that is factory. On all the other trucks I have ever worked on, the inner fender is behind the lip of the outer fender.

    Can anyone confirm this....
     
  2. packey

    packey LawnSite Senior Member
    Posts: 556

    By looking at my 72 that is how it is done. However on my 85 crew the outer fender overlaps the inner fender. So I guess it can be done either way. I do agree though that the inner fender overlaping the outer fender does not look as finished. Hopefully I can get the pics of my 72 poweragon up soon I am in the middle of a repaint then I will put my company's lettering on it
     
  3. Edgewater

    Edgewater LawnSite Senior Member
    Posts: 457

    Thanks for the help

    Adam
     

Share This Page