1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

NEED HELP SOON, trying to install new spindle

Discussion in 'Lawn Mowing' started by Orkin Yards, Dec 21, 2001.

  1. Orkin Yards

    Orkin Yards LawnSite Senior Member
    Posts: 256

    i am trying to put a new center spindle on my 48" SCAG w/b, i have the belts off of the 2 pulleys, and i unscrewed the 2 screws that are in what looks like a flattened split washer in the center of the top pulley (it is a double stacked pulley) but how do i get the pulleys off?? i tried pulling and that isnt' working, do i just break them loose or what?
     
  2. heybruck34

    heybruck34 LawnSite Senior Member
    Posts: 300

    Buy or find two bolts that are the same size as the two bolts you removed from the split hub on top of the spindle. These new bolts can be longer if you don't have the same length. There should be two holes next to the oversized holes that the original bolts went in. Thread the new bolts down the other holes so they hit the pulley. Put your socket and rachet on the new bolts and tighten down evenly- ie 3 turns on one and 3 on the other, 3 on the first and then 3 on the next.... This wil separate the hub from the pulley. Then take a screwdriver and gently pound it in the crack to finish taking the hub off.

    I use the new or subsitute bolts so in case you cross thread or strip you don't ruin the ORIGINAL BOLTS.

    Good luck...
     
  3. strickdad

    strickdad LawnSite Senior Member
    Posts: 544

    follow the instructions above they are correct..
     
  4. eslawns

    eslawns LawnSite Senior Member
    Posts: 712

    Before you start this, go to an auto parts store and get a can of PB Blaster. This is the best stuff in the world for breaking loose rusty hardware.

    When you put the spindle pulley back on, use new bolts. Taking the old ones off removed the rust down to good metal. They will rust more and then be likely to break the next time you take them off.
     
  5. Atlantic Lawn

    Atlantic Lawn LawnSite Senior Member
    Male, from Outer Banks NC
    Posts: 938

    Ah PB Blaster......Stuff really works,like the can too.
     

Share This Page