Need Help?

Discussion in 'Lawn Mowing' started by EAGER ONED, Jun 19, 2007.

  1. EAGER ONED

    EAGER ONED LawnSite Member
    from PHILA P
    Posts: 2

    justyesterday i purchased a used EAGER one 22in mower have second 1 alway's swear by them, cutt the 3 apart lawn's i needed for he day, and decided too change the blade as i have a brand new spear while doing so i removed the blade adapt too change the propelled belt again having 1 why i have two of almost the same mower long story short i didn't get the nut holding the blade on 100% tight first time reason being i had too hasmmer the blade adapter off as itwas properly rusted on a bit and should of lub or sprayed some wd40 so it was back on all the way but anyway mower stated right up but i could hear a tumping sound like the blade was not tight against the afdaper removed adapter sprayed wd40 on shaft and adapter when on tight this time but lawn mower dead doesn't start not flooded removed spark pluh changed still dead was so upset could located my ingnition testor too see if i'm getting a spark bu i'm sure i'm not should i assume i shead a flywheel key? any help i'd appicate
     
  2. BQLC

    BQLC LawnSite Senior Member
    Posts: 574

    man that was a tough read :hammerhead:
     
  3. EAGER ONED

    EAGER ONED LawnSite Member
    from PHILA P
    Posts: 2

    BETthat will be a big help
     

Share This Page