need Lazer HP hydro system help

Discussion in 'eXmark' started by TurfPro, Aug 22, 2004.

  1. TurfPro

    TurfPro LawnSite Member
    Posts: 232

    My Lazer HP 23/52" has 245hrs on it. The hydro system is making a loud "thunking"?? noise and has a pronounced "shudder" when you make turns .
    I had the hydro system serviced but the problems persist. I've also noticed that the grabby shudder gets worse with use.

    Please give any suggestions you have.
    Thanks
     
  2. TurfPro

    TurfPro LawnSite Member
    Posts: 232

    I had one guy tell me it could be the belt............ does that sound right Exmark?

    Thanks
     
  3. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    If I had to gues I'd say belt.

    I would recommend taking it to the dealer. Depending upon your s/n there may be an updated pump drive belt/spring.

    Thanks

    Terry
     
  4. 65hoss

    65hoss LawnSite Fanatic
    Posts: 6,360

    Look under the back of the mower at the hydro belt. You will probably see notches eaten out of it.
     

Share This Page