1. SlimJim Z71

    SlimJim Z71 LawnSite Senior Member
    Posts: 691

    First off, I'd like to say thanks to the people who created this forum. I've been looking for something like this for a while.

    Now for the questions. I have a SnoWay 25-Series HD 7.5' plow that I'm very happy with. I've read some posts in here talking about urethane cutting edges... can someone tell me a little more about them?

    Also... anyone in here using a SnoWay plow that has the "Predator Paw" (the stand for when it's off the truck)???

    Thanks for all the help!

  2. Chuck Smith

    Chuck Smith LawnSite Senior Member
    Posts: 849


    Go here, and use the search term "urethane". Search the snow plowing discussion. There is a bunch of threads about these edges. No need to enter dates.

    ~Chuck Smith
  3. plowking35

    plowking35 LawnSite Bronze Member
    from S.E. CT
    Posts: 1,687

  4. Alan

    Alan Member
    Posts: 1,185

    I just set up one of our Sno-Ways with a urethane edge. Because of the way the plow skin is retained behind the cutting edge on them I had to make some pretty heavy modifications to use urethane. I've found that once an edge gets worn down they don't backdrag worth a hoot, even with downpressure. Because of the limit on how far you can have urethane stick down past the support point I extended the front of the bottom channel 2" down. That way I can get the urethane another 2" past that, giving me 4" of edge below the channel. I also added a strip along the top of the lower channel to retain the Lexan. Now I can remove the edge without having to mess with the Lexan. Before I had to either remove the skin or clamp it in place if I was changing cutting edges.
  5. thelawnguy

    thelawnguy LawnSite Silver Member
    Posts: 2,412

    What is a Sno-Way plow? Please dont tell me its that 995 special at Lowes with the clear blade...
  6. SlimJim Z71

    SlimJim Z71 LawnSite Senior Member
    Posts: 691

    No it's definately not $995. Yes, you can get them in clear. Mine is steel though. They have whats called a "Down-pressure system." It's all hydraulic. No bouncing plow when going over railroad tracks. It's a nice setup. http://www.snoway.com
  7. thelawnguy

    thelawnguy LawnSite Silver Member
    Posts: 2,412

    Nope, thats not the one at Lowes. Looks similar, only much shorter and only 3 ribs-center and ends.
  8. John Allin

    John Allin LawnSite Bronze Member
    Posts: 1,489

    Plowing over RR tracks in a pick-up......

    I'd love to see that. Although if it is one of my guys I see doing it, there will be some personnel changes coming down the pipeline.... soon.
  9. Lazer

    Lazer LawnSite Bronze Member
    Posts: 1,446

    lol, John, I think he was referring to when the plow was UP. Most of the old chain-held plows did have a nasty bounce when going over a road bump such as RR tracks.

    Of course, we're used to the Boss and even the old style, when properly adjusted, stays tucked in the up position in all road conditions.
  10. John Allin

    John Allin LawnSite Bronze Member
    Posts: 1,489

    Ya know.... I shoulda been able to figure that out myself.... go figure....

    Sometimes ya just can't see the forest for the trees.

Share This Page