New Hustler Super Mini Z belt problem

Discussion in 'Homeowner Assistance Forum' started by Doodyboy, May 22, 2005.

  1. Doodyboy

    Doodyboy LawnSite Member
    Posts: 11

    I got the new mower yesterday and had seen a post on another site where they had had a problem with cuts in their new Mini Z. I checked what I could see at the dealer and it looked ok but before unloading it I saw 3 cuts about 3/16" deep in the top of the drive belt. I was able to see underneath from beneath the trailer and when the deck is raised to the transport position, it hits the drive belt. It looks like the pulley for the drive belt is as high as it can go. I was wondering if someone else has seen this and knows a solution other than not raising the deck all the way to the transport position. Other than that the mower is fine. It's a 52" with 24hp Honda.
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

Share This Page