New Project #4

Discussion in 'Landscape Lighting' started by INTEGRA Bespoke Lighting, Mar 24, 2009.

  1. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    This is a project we are in the midst of, similar to #3 in that we are doing all of the lighting, inside, outside and landscape. This one will be very haute couture when it comes to the lighting. Lots of in-floor, recessed in-wall, step lights, custom SS fixtures, custom glass pendants, full automation system, etc

    The crowning jewel here is a crushed glass bar that I am underlighting with a custom RGB LED and DMX system, behind the same bar will be a textured glass backsplash wall that is I am backlighting with a new LED lightbox product. The use of technical and art glass throughout the home is going to be fun to highlight and work with.

    IMG_8103.JPG

    IMG_8106.JPG

    IMG_8108.JPG

    IMG_8110.JPG

    IMG_8116.JPG
     
    Last edited: Mar 24, 2009
  2. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    Here are some, ok well many, photos of an interior we just finished today.

    IMG_9292.JPG

    IMG_9297.JPG

    IMG_9298.JPG

    IMG_9302.JPG

    IMG_9305.JPG
     
  3. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

  4. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    and some more...

    IMG_9315.JPG

    IMG_9316.JPG

    IMG_9317.JPG

    IMG_9320.JPG

    IMG_9321.JPG
     
  5. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    Last few for now. Basement still to finish.

    IMG_9323.JPG

    IMG_9325.JPG

    IMG_9329.JPG

    IMG_9333.JPG

    IMG_9336.JPG
     
  6. RLI Electric

    RLI Electric LawnSite Senior Member
    Posts: 381

    Awesome again, Which recess lights are you using. Looks like adjustable trims for highlighting the artwork. I had looked at some made by Juno. Are those white trims on all the cans?
     
  7. Lite4

    Lite4 LawnSite Gold Member
    Posts: 3,104

    Nice work James. For your backsplash check out ELPs (Electroluminescent panels) You will get much more smooth and even light than building a light box and it doesn't take up anywhere near as much room.

    We are starting a retrofit on an interior next week. Installing coves, step, pendents, and more contemporary step lights. He is in the middle of a basement remodel and I am sure we will be doing that to.
     
  8. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    Thanks Tim. I considered the use of ELPs bit opted instead for the LED panels. I am having DVT custom manufacture them right now. I needed the extra illuminance that was possible with the LED panels in order to punch through the textured glass media that will be back lit.

    Bob. I would stay away from those Juno pot lights you are looking at. (unless you are considering some architectural grade product I am not aware of) Juno pots suffer from a few rather large issues. 1: Trim Finish Options. They are very limited. 2: Their white trims tend to yellow over time with the heat from the lamps. 3: Their trims do not seat very well into their housings. They tend to fall out of place over time.

    For "everyday" lighting I prefer using Contrast Lighting recessed pots. Fantastic trim options, excellent value, and they are Canadian made.
     
  9. klkanders

    klkanders LawnSite Senior Member
    from Midwest
    Posts: 848

    Very Nice James! I like the mix of materials and finishes that were chosen for this home. Your lighting brings out some great detail and finish work.
     
  10. JoeyD

    JoeyD LawnSite Silver Member
    Posts: 2,933

    awesome work James! I think your other project will look better once the clients have furnished it. Both projects look like they could be in Designer Magazine Photo Shoots which I am sure they will. Very nice. Anything on the outside?
     

Share This Page