Newbie Question pulleys

Discussion in 'eXmark' started by PAdaytonaman, Apr 12, 2008.

  1. PAdaytonaman

    PAdaytonaman LawnSite Member
    from pa
    Posts: 1

    Hi all,

    New to the site and I have a newb question. I dropped the deck on my LAzer 60 with ultra cut deck and I had to strip it and sand blast some rust and repaint. OK

    While I was at it I replaced the mule belt and the deck belt, it seems to be laboring in heavy grass now. I am wondering if I put a washer on the wrong side of a pulley and my pulley heights are off?

    I don't think so, but can someone post a picture of a top view of the deck pulleys? Also, could the new belts be too stiff for the tensioner to keep tight?

    This machine has about 230 hours on it and its 6 years old.

    Any help would be appreciated

    Thanks
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    PAdaytonaman,

    You can access owner's and parts manuals on our website (http://www.exmark.com/manuals.htm). The parts manual often has a picture of the top side of the deck. You'll need your model number and serial number to find the right manual.

    Later,
    KC
     

Share This Page