np 203 transfer case/shifter

Discussion in 'Trucks and Trailers' started by larrymct, Nov 24, 2000.

  1. larrymct

    larrymct LawnSite Member
    Posts: 2

    My brother has a totally rebuilt 77 chevy side step. He cannot figure out how to get the shifter installed. We would greatly appreciate help from anyone who can assist. Thanks.
     
  2. Chuck Smith

    Chuck Smith LawnSite Senior Member
    Posts: 849

    E mail me. I have a diagram that should help you. I will send it to you as a jpg file.

    ~Chuck
    csmith669@aol.com
     
  3. 3/4tonTodd

    3/4tonTodd LawnSite Member
    from Iowa
    Posts: 127

    larrymct

    I have a 76 K20 and in my cab, under the carpet, the center section of floor is just held in place with screws. I can just pull that up to get my shifter in and out.

    I have a different problem though - I assembled my shifter incorrectly and can't get it to work. See my post on that for more. And if you have any advice, I'd love to hear it!!

    Todd
     
  4. Chuck Smith

    Chuck Smith LawnSite Senior Member
    Posts: 849

    I have no idea where I got this from ;)

    Too large to post here on Lawnsite. Well, I'll try it anyway, but don't blame me for how long it takes for this page to load here!

    <img src="http://www.chuckschevytruckpages.com/images/203shiftdiagram.jpg">


    ~Chuck
     
  5. mike reeh

    mike reeh LawnSite Member
    Posts: 229

    I have often wondered what would happen if I took apart the linkage on my spare np203.. I dont dare mess with it :) I also wondered if there was such a thing out there that tells how to assemble it but figured Id never see such a thing. That pic is something Ill definately be saving, for future reference.


    good work chuck :)

    mike
     

Share This Page