ocd cant get deck leveled everride / gravely

Discussion in 'Mechanic and Repair' started by grass disaster, Aug 12, 2012.

  1. grass disaster

    grass disaster LawnSite Silver Member
    Posts: 2,582

    on warrior

    so i did as instructed in the book.

    got the front pretty level
    got the 1/4 higher in the back right but the back left is giving me issues.

    back left is about 1/2" higher than the front left.

    i'm not sure if the deck is bent or if its just a bad design from mounting positions.

    either way its better than what it was so i might just have to live with it.
     
  2. Jimslawncareservice

    Jimslawncareservice LawnSite Platinum Member
    from mn
    Posts: 4,133

    Did you level side to side first?
    Posted via Mobile Device
     
  3. grass disaster

    grass disaster LawnSite Silver Member
    Posts: 2,582

    Yup. Did that.
    It was driving me crazy. I think the deck must be tweeked or I have a spindle tweeked. A little.
    Posted via Mobile Device
     
  4. Ijustwantausername

    Ijustwantausername LawnSite Bronze Member
    Posts: 1,443

    I did the exact same thing to my Cheetah on Fri. I noticed the R side was scalping and sure enough it was about 3/4" lower than the L side, plus the R side tire had 15.5 PSI and the L side had 21 PSI . I went back and forth and back and forth with a tape measure trying to get it right. Finally I got them within 1/16" of an inch to each other, still not exactly the same though! :dizzy:
     
  5. grass disaster

    grass disaster LawnSite Silver Member
    Posts: 2,582

    I don't think u could notice unless its greater than 1/4 on the front.
    So 1/16 is pretty sweet if u ask me.
    Posted via Mobile Device
     

Share This Page