ocdc and ultra vac usage

Discussion in 'General Industry Discussions' started by scott's turf, Feb 7, 2006.

  1. scott's turf

    scott's turf LawnSite Senior Member
    from NH
    Posts: 949

    Do the current ocdc's made for exmarks allow for the ultra vac to be used when the ocdc is angled up or do they have to be removed each time you use the ultra vac? I am thinking of making one to accomplish this feat.
     
  2. Tadams

    Tadams LawnSite Senior Member
    Posts: 788

    I don't think that you can have an OCDC on a lazer while you have the UV hooked up. Since the UV is belt driven and the belt would be in the way of their might be a little problem. I would like to have one because I bag some properties but there are more that I don't nad it would be nice to use an OCDC at certain times. I may be wrong about this and if I am then I apologize. But if you find one let me know because I'd like to have one.
     
  3. scott's turf

    scott's turf LawnSite Senior Member
    from NH
    Posts: 949

    I haven't seen one yet. But I have a design that I am going to fabricate that will hopefully do just that.
     

Share This Page