OCDC for Hustler z

Discussion in 'Lawn Mowing' started by HLC, May 5, 2002.

  1. HLC

    HLC LawnSite Member
    Posts: 128

    I posted this question in a recent thread and didn't get a response. So here goes again. Does anyone know of anyone who makes an OCDC for a Hustler Z, 60"?

    Joe
     
  2. P&J Lawncare

    P&J Lawncare LawnSite Senior Member
    Posts: 531

    I will probably look dumb for this but here it goes what is a ocdc
     
  3. TLS

    TLS LawnSite Fanatic
    Posts: 7,937

    Dixie Chopper.....Standard

    Exmark Lazer......York Sheet Metal


    Once you use one, you'll find it real hard to operate without one. Kinda like a snowplow without power angle!!
     
  4. HLC

    HLC LawnSite Member
    Posts: 128

    P&J,
    It's an Operator Controlled Discharge Chute. It enables the operator to block off the opening on a side discharge deck. For example when you're passing by a flower bed and don't want to discharge clipppings into the bed.
     
  5. P&J Lawncare

    P&J Lawncare LawnSite Senior Member
    Posts: 531

    Thats what I thought it was but I wanted to make sure. I was going to have it fabbed to fit my z but it looks like the one from york will fit a hustler z any ways. I called york and I am expecting a call from them to see if it will work on my z.
     
  6. HLC

    HLC LawnSite Member
    Posts: 128

    P&J,
    Let me know what you find out.....Joe
     

Share This Page