OCDC with Catcher installed

Discussion in 'Lawn Mowing' started by LCME, Oct 25, 2004.

  1. LCME

    LCME LawnSite Senior Member
    Posts: 430

    Which OCDC brand/model would you get? I would like to be able to keep the OCDC on, flip it up then attach the grass catcher without removing the OCDC. I have a TTHP 48" exmark with an exmark grass catcher. Thanks, LCME
     
  2. PaulJ

    PaulJ LawnSite Bronze Member
    Posts: 1,776

    you will probably have to buiold your own. Ihtink all the OCDC's out there have to come off to put on a grass catcher. That's one of the reasons I built my own.
     
  3. LawnScapers of Dayton

    LawnScapers of Dayton LawnSite Silver Member
    Male, from Dayton, OH
    Posts: 2,574

    I was able to make my Accelerator bagger and my Qwikchute OCDC work together......

    Qwikchute did not have a product to exactly fit the Wright Stander.....so I made one fit.

    I will need to make a small change to the bagger to make it work better..........

    Derek
     
  4. LCME

    LCME LawnSite Senior Member
    Posts: 430

    Yup, that's what I thought. I will fab one myself.
     
  5. J.Gordon

    J.Gordon LawnSite Senior Member
    Posts: 675

    Not to mention, it will cost about three bucks in material and an hour or two in labor. Compared to a $100.00 or more for a 12’’x 6’’ flat piece of 1/8’’steel with a couple of holes in it. There is a lot of satisfaction for me not wasting money like that, when I can make the add-ons in my spare time. And then you know it will fit!
    Jeff
     

Share This Page