Oil on Driveway

Discussion in 'Lawn Mowing' started by Russ, Sep 14, 2009.

  1. Russ

    Russ LawnSite Senior Member
    Posts: 539

    Whats the best/easiest way to get lines of Lucas 15-40 off a driveway after it spilled out of an overflow tube on a steep driveway???

    Thanks in advance!!

    Russ
     
  2. Ruben Rocha

    Ruben Rocha LawnSite Senior Member
    Posts: 577

    I can tell you how we did it years ago.
    Pour some sand with straight portland cement on the spill. Then rub it in with a 2X4.
    Of course it may not match if you have a white driveway.
     
  3. jkilov

    jkilov LawnSite Bronze Member
    from MS
    Posts: 1,415

    If you notice right away throw sand on it or wipe off with rags. The leftover stains can be somewhat removed by rubbing with wire brush or applying bleach.
     
  4. Russ

    Russ LawnSite Senior Member
    Posts: 539

    Thanks guys but it has been there 6 days now. Any other ideas??
     
  5. Toy2

    Toy2 LawnSite Bronze Member
    Posts: 1,924

    Get a can of carb cleaner, spray and blot it with a rag, it should would, I do it all the time to mine, but mine is a washed rock finish, it still should work...
     
  6. mowerbrad

    mowerbrad LawnSite Fanatic
    Posts: 6,273

    There is a product called "Pour-n-restore", you baically pour the product right on the stain and spread it out over the entire stain. Let it dry durring the day and once it has turned into a powder you can just vacuum it up

    Here's the link: http://www.pour-n-restore.com/index.htm
     

Share This Page