Old school Homelite saws.

Discussion in 'Mechanic and Repair' started by RedWolf, May 29, 2006.

  1. RedWolf

    RedWolf Banned
    Posts: 280

    Hey guys.I have to old Homelite chainsaws.One is a bow saw and the other is a SuperXL.Both have metal cases around the motor.I need to know if a can get new carbs for them or rebuild kits for the carbs. Both saws have Zama C2 carbs.That is the only numbers I could find on the carbs. Thanks for any help you can shoot my way guys.
     
  2. newz7151

    newz7151 LawnSite Silver Member
    from Tejas
    Posts: 2,419


    http://www.zamacarb.com/tips.html
     
  3. RedWolf

    RedWolf Banned
    Posts: 280

    I cant find the carb model im looking for.
     
  4. newz7151

    newz7151 LawnSite Silver Member
    from Tejas
    Posts: 2,419

    What is the entire carb model? Gotta be more than just C2.

    A C2 (depending on the rest of your numbers) uses either a

    RB-15, 16, 17 or 18 rebuild kit or a GND-08, 09, or 10 Gasket and Diaphragm kit.

    http://www.zamacarb.com/pdfs/QuickKit_CR2006.pdf

    There are not but a few C2 carbs listed there.. unless they have outdated some of the carbs and do not list them on the x ref.
     
  5. RedWolf

    RedWolf Banned
    Posts: 280

    I pulled the carb off both saws and the only numbers on them is C2.Where would the other numbers be?:confused:
     
  6. newz7151

    newz7151 LawnSite Silver Member
    from Tejas
    Posts: 2,419

    what is the UT number off those units?
     

Share This Page