1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

part numbers, Help!

Discussion in 'Mechanic and Repair' started by Metalmacguyver, Mar 30, 2006.

  1. Metalmacguyver

    Metalmacguyver LawnSite Member
    Posts: 45

    i need some part numbers asap. the local repair shop that i normally go to for my parts and assistance when fixing is in the middle of moving into a new building so they are closed for the week.

    i need a starter solenoid and mower deck belt for a scotts tractor.
    S1742 or 1742G date-041699

    i also need a carb rebuild kit for a toro push mower. there is no indication of who made the engine so im guessing it could be honda (made in japan right?) or a toro made engine. the numbers are VMF5-128244

    i also need a carb kit and the throttle lever/trigger for a small McCulloch chain saw.

    thanks ahead of time for the help!
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023

    I don't haves parts look-up on these units, Well maybe the Toro if I had the model number off the deck. They have the engine break-down with the deck assembly. I did do a web search on the other two and still came up empty.
    I tried.....
  3. Metalmacguyver

    Metalmacguyver LawnSite Member
    Posts: 45

    ok thanks. i will have to wait till my shop is open again. saturday or monday.

    as far as a deck number on the toro, i cant find it. it was probably somewhere on the rear of the machine right? well i think i know where it was and there is some pretty deep pitting in the aluminum of the deck. the engine had the tags GTS and OHV on it. all else i know is that its a 21" cut and a rear bagger. Thanks again!
  4. lucforce

    lucforce LawnSite Member
    Posts: 223

    The engine that you have was made by suzuki. That was an outstanding and expensive mower in its day.
  5. Metalmacguyver

    Metalmacguyver LawnSite Member
    Posts: 45

    Suzuki?!? never heard of suzuki into anything smaller than dirtbikes. do you know if there is any parts support still around for it and how old the mower actually is? as far as being and outstanding mower, i can say that it still is! (just needs a little TLC)
  6. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023

    The only place I know of to get Suzuki parts is from a Toro dealer with the deck number. You may get lucky and have a dealer look at the unit and maybe he can identify which model it is. Toro parts look-up is a pain in the arss without model numbers.
  7. Metalmacguyver

    Metalmacguyver LawnSite Member
    Posts: 45

    ugh! thanks for the heads up. ill bring it with me when i go for parts.

Share This Page