1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Parts for a Pump

Discussion in 'Power Washing' started by mowermankevin, Mar 23, 2008.

  1. mowermankevin

    mowermankevin LawnSite Senior Member
    Posts: 270

    Do these part numbers mean anything to anybody? I'm going to print them as they are on this pressure washer: Pump Prap84434 O.L.3207316 6516/8064 0005 101003 MTPV 8443 191693 This is a little Briggs & Stratton M#020206 Rev#00 (?) Type 4100CP S#1009684665 G.P.M. 2 P.S.I. 2050 Where the fresh water input stem goes into the middle of the pump the stem is half inch threaded into the pump body but it looks like it was pressed in and stripped the threads at 12 & 6 O'clock position, any good sites for pump parts would be appreciated, thanks Y'all

    FCPWLLC LawnSite Senior Member
    Posts: 352

  3. mowermankevin

    mowermankevin LawnSite Senior Member
    Posts: 270

    That's kinda what I was thinking, it's a neighbors pump and I told him if I can't find parts without driving around,to scrap it. Thanks for the info.

Share This Page