Patterns for curved walkways?

Discussion in 'Hardscaping' started by Blmtlandscapes, Jul 12, 2008.

  1. Blmtlandscapes

    Blmtlandscapes LawnSite Member
    Posts: 116

    Hello, I have done a couple of straight walkways with a simple running bond pattern. I have a walkway coming up that has one very sharp curve (about 90 degrees) and the customer has asked for a herringbone pattern. Is this possible and what are the best patterns for curved walkways. Thanks
     
  2. zedosix

    zedosix LawnSite Silver Member
    Posts: 2,628

    Herring bone is perfect for really sharp bends (I would go with a 45deg. pattern) because it is all cut, so the sharp curves won't make a difference. Running bond is typically the best way to go but if the bend is too sharp you will either end up with to large of gaps or having to cut all the pieces at the bend. You will end up using more brick with the herringbone but it will be the nicest in my opinion.
     
  3. DVS Hardscaper

    DVS Hardscaper LawnSite Fanatic
    Posts: 6,406

    Herring bone will be perfect.

    As well as the Parquet pattern.

    Or, the "I pattern" if you use 6x9 and 6x6.
     

Share This Page