penetration oil

Discussion in 'Eureka Fluid Film' started by cbelawn, Mar 13, 2006.

  1. cbelawn

    cbelawn LawnSite Member
    Posts: 91

    what are the penetrating qualities? like a rust buster?
     
  2. Dano50

    Dano50 LawnSite Bronze Member
    Posts: 1,781

    I know people that prefer PB Blaster for penetration because it will act faster, but there is no product that will work better for busting lose a stubborn nut or bolt. Fluid Film will save you from having to cut one lose. Because Fluid Film has a thicker viscosity it will take longer to penetrate, but because it contains no solvents it will not evaporate. It will continue to penetrate until it gets the job done. For a really stubborn part, just let it work its magic for a few hours to a day or two and it will prove itself. I've never known it to fail.
     
  3. Dirty Water

    Dirty Water LawnSite Fanatic
    Posts: 6,799

    I love PB Blaster.

    Great stuff, Its gotten nuts off of turbochargers and manifolds that have been cooked on from years of 800+degree temps. That sold it for me :)
     
  4. TURF DOCTOR

    TURF DOCTOR LawnSite Silver Member
    Posts: 2,138

    It's good but we keep kroil in the shop this stuff is the katz azz.
     

Share This Page