perm a green honda recoil replacement

Discussion in 'Pesticide & Herbicide Application' started by ant, Jun 21, 2006.

  1. ant

    ant LawnSite Silver Member
    Posts: 2,442

    i have the Magnum,what the easy-est way to replace the recoil string?
     
  2. lawnservice

    lawnservice LawnSite Senior Member
    Posts: 589

    unbelievable the way they designed the frame around the motor without thinking...."what if the coil spring or pull rope needs replacing?"

    i hope there is an easier way but it looks like you gonna have to pull the motor?
     
  3. Grandview

    Grandview LawnSite Gold Member
    from WI
    Posts: 3,251

    You have to remove three of engine mounting bolts and turn the engine to remove the recoil. My recoil spring broke last year while under warranty. I started to replace it and gave up. Took it to the Lesco dealer he it back in a day or two. I am glad I gave up.
     
  4. indyturf

    indyturf LawnSite Bronze Member
    from Indy
    Posts: 1,873

    I replaced mine about a month ago, wasn't as bad as I thought it would be! just take out 3 of the bolts on the engine base leaving the inside front bolt, then you can turn the engine at a angle and take off the pull start. I took the bolts on the starter off before unbolting the engine. took about 1/2 hr. about 1" more clearance would have made this a 5 min job.
     
  5. DUSTYCEDAR

    DUSTYCEDAR LawnSite Fanatic
    from PA
    Posts: 5,137

    use a torch
     

Share This Page