Permagreen Ultra Very Good Shape

Discussion in 'Marketplace' started by GravelyGuy, Mar 17, 2010.

  1. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    I am selling this Permagreen Ultra to buy a Z-spray. Myself and A Plus Bob (lawnsite member) have went over this machine for a couple of weeks and replaced everything that was worn/broken. THANK YOU Bob! The machine is ready to use right away. The only broken part is the electric start. It's not worth fixing. It starts in 1-2 pulls.

    We have a ton money in parts and labor on this machine getting it ready to go for this season.

    New parts:

    -New Transaxle----We didn't replace this part, but it was still wrapped in factory plastic where it was recently replaced. It is not original. Look at the pics.
    -Brand New Carb and Springs
    -New Universal Sleeves
    -Main Hopper Slide Plate
    -Third Hole Adjustment Cable
    -Third Hole Adjustment Handle
    -New Belt
    -New Spinner Shaft and Hub
    -New Oil, Fuel Filter, Air Filter
    -New Rear Axle----We had a new stainless axle cut to factory spec and installed because the wheels had some play in them. This will never need work again.

    The machine was also cleaned of all of the old grease, brakes adjusted, and we replaced any hardware/gaskets that needed it. The tank and lines were completely flushed out.

    I also have a brand new spray switch and hopper paddle that we didn't end up needing that will be included

    The machine does not have an hour meter so the hours are unknown, but it is ready to go and nothing is broken. Many of the PG you see for sale that are advertised "ready to go" are not.

    The price is $2500 firm.

    pg 001.jpg

    pg 002.jpg

    pg 003.jpg

    pg 004.jpg

    pg 005.jpg
     
  2. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    more..........

    new parts 003.jpg

    new parts 005.jpg

    new parts 004.jpg
     
  3. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    Some new parts

    new parts 001.jpg

    new parts 002.jpg

    new parts 006.jpg
     
  4. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    I forgot, we also replaced the on/off switch with a new one.
     
  5. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    to the top
     
  6. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    Bump...........
     
  7. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    Here is the underside shot as requested.

    underside.jpg
     
  8. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    You won't find a better running PG Ultra.
     
  9. indyturf

    indyturf LawnSite Bronze Member
    from Indy
    Posts: 1,877

    Looks very clean!! someone will get a nice machine..
     
  10. GravelyGuy

    GravelyGuy LawnSite Silver Member
    from Indiana
    Posts: 2,517

    Thanks Jay!
     

Share This Page