Pics of leaf box finished!

Discussion in 'Lawn Mowing' started by nobagger, Nov 17, 2007.

  1. nobagger

    nobagger LawnSite Gold Member
    from Pa
    Posts: 3,065

    Here are some quick pics of our leaf loader and box finished. The other half of the pics is "some more leafloader pics" thread.

    PB170635.JPG

    PB170636.JPG

    PB170639.JPG
     
  2. Sweet Tater

    Sweet Tater LawnSite Silver Member
    Posts: 2,123

    Nice setup,
     
  3. SpudsM15

    SpudsM15 LawnSite Senior Member
    Posts: 627

    Have you had any problems with the discharge tube getting clogged?
    Looks good nice and clean setup job. Some of the rigs I have seen look as if they are going to fall apart while being transported...
     
  4. deere615

    deere615 LawnSite Fanatic
    Posts: 5,676

    Looks nice.
     
  5. nobagger

    nobagger LawnSite Gold Member
    from Pa
    Posts: 3,065

    Not as of yet. Your talking about the white tube right? We've had a few small cloggs in the suction tube but nothing a quick little jerk of the hose doesnt fix. The white discharge shoot is schedule 30 PVC, I had to get 2 pieces so it would be long enough. The pipe is 11' long and we just notched it out with a jigsaw so it slides right over the welded studs on the loader and we just use the plastic nuts that held the deflector on.
     
  6. The Captain

    The Captain LawnSite Senior Member
    Posts: 607

    What diameter is that discharge pipe?
     
  7. ALarsh

    ALarsh LawnSite Silver Member
    from Midwest
    Posts: 2,412

    Is that front platform hooked into the plow mounts? Have any better pics of it?
     
  8. nobagger

    nobagger LawnSite Gold Member
    from Pa
    Posts: 3,065

    Its 6" schedule 30 PVC
     
  9. nobagger

    nobagger LawnSite Gold Member
    from Pa
    Posts: 3,065

    Yes it goes right into the mounts and there are better pics in a thread called "some more leaf loader pics"
     
  10. Charles

    Charles Moderator Staff Member
    Posts: 7,952

    Nice, but I could see that setup easily getting clogged. Limbs wedgeing in the pipe. Better carry a rotor rooter watchmacallit with you
     

Share This Page