Please chime in. 34" stander or 36" hydro wb?

Discussion in 'Lawn Mowing' started by JSW Development, Feb 6, 2012.

  1. JSW Development

    JSW Development LawnSite Member
    from TX
    Posts: 45

    I'm torn. I need to add another mower for our small residential clients and our commercial clients with small grass areas.

    I'm limited to 36" due to gate sizes.

    I have some 52" great Danes that we use for larger commercial accounts and we love them. I'm worried about rutting and traction with the small tires on the smaller stander, but i think it would be more productive than the wb with a caster sulky. Maybe I'm wrong though, I've never owned a hydro wb.

    The stander is 3600, the wb is 3000. Both are new but older model years.

    Which would you choose?
     
  2. TheChiefsLawnCare

    TheChiefsLawnCare LawnSite Senior Member
    Posts: 961

    34 if its between those two. But if you really want to guarantee you'll get into 95% of your residential go with a 32.
     
  3. cvcook

    cvcook LawnSite Member
    Posts: 203

    A W/B won't rut like a Stander!
     
  4. Exact Rototilling

    Exact Rototilling LawnSite Fanatic
    Posts: 5,355

    If my memory is correct a Wright stander 32 weighs less than a Gravely 34 stander.
    Posted via Mobile Device
     
  5. JSW Development

    JSW Development LawnSite Member
    from TX
    Posts: 45

    I can only get the 3600 deal for the Great Dane unit. I like my other great dane, so the brand isn't an issue.
     
  6. JSW Development

    JSW Development LawnSite Member
    from TX
    Posts: 45

    Any other feedback? Words of wisdom?
     
  7. ralph02813

    ralph02813 LawnSite Bronze Member
    Posts: 1,041

    I have a 36 Ferris Hydro, it works great for me, one of the things that I found interesting is that not all 36's are 36, the same goes for other sized mowers. There is more to size than cutting width. I have a couple of narrow arbors that I squeeze through and some pretty hilly properties, I cannot image have any kind of rider on some of the hills I have to deal with - hope that helps.
     
  8. I own a 36 wright stander and a 32 ferris hydrocut. I haven't used the ferris yet but can tell you the wright is my main workhorse. If you have all yards that are 1/4 of cutting or less I would say go with the wb. If you have stuff 1/3-1 acre def go with the stander. Depending on backyards, I would get the 36" Wright.
    Posted via Mobile Device
     
  9. JSW Development

    JSW Development LawnSite Member
    from TX
    Posts: 45

    Yeah I never thought of it as far as size of lots. I have some ROW that I maintain too and the stander would help get the trim work done faster. Thanks for the feedback.
    Posted via Mobile Device
     
  10. Valk

    Valk LawnSite Silver Member
    Posts: 2,711

    The stander has a smaller footprint/length than most wb's (especially with a castored sulkey) so it should be quite useful when in tight confines.

    Only you know if your soils (and rainfall potential) are more or less prone to rutting of which the heavier mower will contribute. The stander will weigh more...and will weigh even more w/ the operator's weight added in.

    IMO, the smaller standers are not utilizing wide-enough tires for the given weight of the machine + operator. Obviously to attain an adequate trim-side the manufacturers need to make allowances.
     

Share This Page