pressure wash pavers?

Discussion in 'Hardscaping' started by ethany, May 30, 2010.

  1. ethany

    ethany LawnSite Member
    Posts: 35

    I am in the process of removing the old polymeric sand. I have EP Henry devon stone pavers. I was thinking of pressure washing before replacing the polymeric sand with a 45 degree nozzle. Would this be a problem?

    ALso I was thinking of sealing the pavers. Can you recommend a good product?

    Thanks for your help.
  2. ethany

    ethany LawnSite Member
    Posts: 35

    I have one more question, Showers are in the forecast the next couple of days. Do you need a full 24 hours with out rain for it to set properly?
  3. shovelracer

    shovelracer LawnSite Silver Member
    Posts: 2,009

    probably depends more on the manufacture than anything. We do try for a dry stretch though.
  4. Mark Antunes

    Mark Antunes LawnSite Member
    Posts: 5


    I do not advise that you use a power washer on DevonStone nor should you seal it. To discuss your situation further, please call EP Henry at 800-444-3679 and ask for Mark the Hardscaping Construction Technical Information Manager.


    Mark Antunes

Share This Page