Pro Slide Users Help

Discussion in 'Lawn Mowing' started by Rhett, Jun 8, 2005.

  1. Rhett

    Rhett LawnSite Bronze Member
    Posts: 1,071

    Both springs that retrack the plate of my proslide broke at the same time. The Novae site is not any help as they show little and what they do show involves the new and improved pro slide. If anyone could take a picture or explain how they loaded the springs it would be much appreciated.

    Thanks
    Rhett

    Ps My feet hurt real bad :)
     
  2. out till dark

    out till dark LawnSite Member
    Posts: 63

    put both springs on the arm with smaller side on arm and longer end of the springs pointed toward machine.

    put the foot plate back on. the long end of the springs should be sticking out.

    now put the unit back on the mower. retract plate and stand on it.

    use a pair of pliers to grab the spring and a flat head screw driver. to push it behind the stop.

    make sure you have safety glasses on before you atempt this. ;)

    Hopefully your dealer didn't give you 2 right or 2 left springs and youll be ok

    I just replaced mine today
     
  3. Rhett

    Rhett LawnSite Bronze Member
    Posts: 1,071

    Thanks for the help. For some reason could not figure out how to get it back together. My feet also thank you.

    Rhett
     
  4. out till dark

    out till dark LawnSite Member
    Posts: 63

    did u get r dun. I love my proslide
     

Share This Page