Propane Injection

Discussion in 'Trucks and Trailers' started by Brickman, Sep 10, 2002.

  1. Brickman

    Brickman LawnSite Bronze Member
    Posts: 1,249

    I just ordered propane injection for my PSD today. I will keep you up to date on how this does for me. That will make my little sentence at the sig line all the more true. :D

    The upgrade numbers are as follows.

    80 HP
    66% more torque (150-250 lbs)
    40% better fuel mileage

    along with cleaner oil due to more complete fuel burn

    Bring it on. With the upgrades already done I will have in the neighbor hood of 385 HP and some where between 850 and 950 lbs of torgue. I will have to go dyno it when it is all on so I know for sure.
     
  2. MacLawnCo

    MacLawnCo LawnSite Bronze Member
    Posts: 1,847

    Good God.

    :eek: :eek: :eek: :eek: :eek: :eek: :dizzy: :dizzy:

    That ought to tow just about anything. I hope it does not shorten the engines lifespan though. Keep us informed on how it goes.
     
  3. Imow4u2

    Imow4u2 LawnSite Senior Member
    Posts: 377

    You'll find that with 385 RWH which I doubt you'll see with just a chip and gas. you Will be in the 700-800 torque range at the rear wheels. remember this is a v-8 not an inline. I would go with injectors next. The gas will not shorten the life of the motor as long as it's not mis-used
     

Share This Page