1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Pulser wiring question

Discussion in 'Irrigation' started by greenmonster304, Jul 29, 2011.

  1. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,013

    I opened up my pulser became thought the battery was bad and I found a black wire that was broken off from some where. It is not evident where it came from so I was hoping one of you guys who has one could open it up and tell me what terminal it goes to. It's the only black wire in there. Thanks a bunch.
    Posted via Mobile Device
     
  2. Buck_wheat

    Buck_wheat LawnSite Senior Member
    Posts: 586

    Any particular brand & model #?
     
  3. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,013

    Progressive 2003
    Posted via Mobile Device
     
  4. Buck_wheat

    Buck_wheat LawnSite Senior Member
    Posts: 586

    I've never had an opprtunity to open one up. I believe Progressive was taken over by Tempo here's a link: http://www.tempo-textron.com/

    Maybe you can get tech support, or someone else will chime in.
     
  5. 1idejim

    1idejim LawnSite Fanatic
    Posts: 8,810

    post a pic, they aren't that complex
     
  6. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,013

    I have since called tempo. They told me where it went.
    Posted via Mobile Device
     
  7. Sprinkus

    Sprinkus LawnSite Silver Member
    Posts: 2,045

    Goes to "blk -" on circuit board.
    OK, I just made that up.
     
  8. Buck_wheat

    Buck_wheat LawnSite Senior Member
    Posts: 586

    could go to blue or red also
     
  9. 1idejim

    1idejim LawnSite Fanatic
    Posts: 8,810

    soooooo what'd they say? :confused:
     
  10. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,013

    It came off a terminal on the charging port. It was confusing because it was soldered to a post that had a brown wire. There were also two unused posts so I wasn't sure where it went. I still have to get a new battery. I went to radio shack to get some soldering supplies and to see if they had a battery but they don't carry that one. I guess I will have to order one.
    Posted via Mobile Device
     

Share This Page