pulverizer teeth

Discussion in 'Heavy Equipment & Pavement' started by eludemann, Mar 21, 2010.

  1. eludemann

    eludemann LawnSite Member
    Posts: 58

    We have a 6' gill pulverizer that needs new spike teeth and probably u-bolts. The manual says 5/8" x 8". I tried a search here and google, with very few good results in what we need. TSC didn't know where to get them. Does anyone have any ideas? I'm in northern Indiana. Thanks in advance.
     
  2. wanabe

    wanabe LawnSite Senior Member
    from So. IL
    Posts: 943

  3. J. Peterson Grading

    J. Peterson Grading LawnSite Senior Member
    from IA
    Posts: 989

    Fond your local Woods Equipment dealer. Most likely located at a Deere or Case dealership.

    J.
     
  4. Tim C.

    Tim C. LawnSite Member
    Posts: 54

    I have the same gill and I usually use old railroad spikes. They work perfect and as I live by some railroad tracks I can usually find some old discarded ones.
     
  5. eludemann

    eludemann LawnSite Member
    Posts: 58

    This looks to be the cheapest option so far. Bobcat of Ft. Wayne is one of the local woods dealers and they want over $7 for each tooth and over $180 for 25 bolts. Thanks for the fast response!
     
  6. wanabe

    wanabe LawnSite Senior Member
    from So. IL
    Posts: 943

    Shoup parts in kankakee, IL has them too, arround $2.20 ea. You can call them and they will hook you up, and have them at your door the next day. shoupparts.com
     

Share This Page