Pump guidance and hack pics

Discussion in 'Irrigation' started by FIMCO-MEISTER, Aug 11, 2011.

  1. Thanks Jim. This is all giving me tired head. Think I'll mosey away...........
     
  2. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,005

    Last edited: Aug 14, 2011
  3. Found a place that had parts for a DB3 but they were all listed as obsolete.
     
  4. 1idejim

    1idejim LawnSite Fanatic
    Posts: 9,132

    i have an o-ring and seal kit that fills most obsolete voids
     
  5. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,005

    You can check your Grainger catalog for a number 200 shaft seal. There is an industry standard for these things, and all the links for a Jacuzzi seal say it's a 200
     
  6. But if it was recommended to me to replace all the parts when I disassemble? seems a shame to go through all this trouble and not new everything up.
     
  7. Mike Leary

    Mike Leary LawnSite Fanatic
    Posts: 21,796

    Or buy a fresh one with warranty.
     
  8. i guess I can do that and use the existing motor?
     
  9. Mike Leary

    Mike Leary LawnSite Fanatic
    Posts: 21,796

    For a boat anchor.
     
  10. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,005

    Pump and parts may be discontinued. At 11 years of age, the innards should be fine. Buy a shaft seal and play around with the pump some Sunday afternoon when the football game stinks.
     

Share This Page