1. n y snow pros

    n y snow pros LawnSite Senior Member
    Posts: 252

    We use Protec and Avalanch pusher boxes on our front end loaders,ranging in 12 to 16 feet widths which can push up to about 17 yards of snow at a time. has anyone have any experience with the bigger boxes ( up to 24feet)do they work as well or has any one had any problems with the smaller boxes like ours?<p>----------<br>J PARKER<br>914-485-4200
     
  2. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    what does a pusher in the 12-16' range cost? I thought about getting one for my loaders. I currently have a 9 foot blade on my Kubota 544 loader, and a 12 foot blade on my cat loader. I wonder if having a pusher and a blade would be a good idea. What do you guys think?<p>Geoff
     
  3. plowking35

    plowking35 LawnSite Bronze Member
    from S.E. CT
    Posts: 1,687

    Pusher boxxes are the way to go in large commercial applications. If you are not useing them you are way behind the times. They go for less than 5k and will at least double your effenciency. the only way its not worth it is if you are being payed by the hour, cause they save way to much time, unless you charge alot more for the machine and pusher. A large piece of equipment with a plow blade is way to slow and ineffecient. I dont have a property yet where I can use one, but as soon as I land a large retail/commercial lot, that will be my first purchase. You can e mail protech and get a video. Way cool stuff. Or join SIMA and get one sent to you from protech.<br>Dino <p>----------<br> Professional Ice and Snow Management <br>Products:Services:Equipment www.sima.org
     
  4. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    The thing is that both loaders are assisted by trucks. The loaders also sit on site all year. Except for the cat it does two condos, once 1 mile down the road from the other. If i had that cat it 10 different sites i would buy one in a second. Maybe i get one next year.<p>Geoff
     
  5. n y snow pros

    n y snow pros LawnSite Senior Member
    Posts: 252

    Protect pushers start at about $3000.00 and go up to $9900 for a 16or18ft box that folds to 8ft so you can travel down the road while its still attached to the machine.One 12ft box will do the work of 4 loaders such as a 928cats. plows on loaders are quite honestly a waste of time.These pusher boxes also double as a great piece of avertising as we put our name right on the moldboard in 25&quot; letters and then leave them on site like a giant billboard.Where we had 3 loaders and 4 trucks we now have one 12ft box and one truck and they finish the job in the same amount of time.<p>----------<br>J PARKER<br>914-485-4200
     
  6. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    Well maybe next year i will get one. The thing is the parking lots that the cat does are almost perfect rectangles. It only takes the guy for hours to do both of them very well. If it took him any less there wouldn't be much for him to do after. Its kinda hard to get a guy to come and plow for 2 hours. This way it takes him 8 hours to plow both condos, clear the sidewalks, treat the sidewalks and then head home. Anyways this year i am not about to buy anything with no snow, maybe next year. The loader worked better than the guy who did the condos for two storms with an f 350 dump truck. <p>Geoff
     
  7. nsmilligan

    nsmilligan LawnSite Member
    Posts: 121

    Boss has a &quot;construction-grade power V&quot; My V plows on my pickups are great, pushers are only good in one direction, I'm thinking to next season now and putting a &quot;power V &quot; on our 4X4 backhoe, it will have some of the advantages of a pusher in the scoop position but will still roll snow to either side when needed.<br>Bill
     
  8. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    I am going to check out that boss v-plow that might be the thing to put on the loader. It can go both ways, and fold into a scoop when traveling the road, a lot better than a 12' blade.<p>Geoff
     
  9. Lazer

    Lazer LawnSite Bronze Member
    Posts: 1,446

    J Parker,<p>We have a 20' folding Pro-Tech and love it. The operator generally folds only 1 side at night and both sides of course during the day. I think the 20' is rated at 28 cubic yards. You needs a decent size loader for it. We have it on a Komatsu 340.<p>You said plows on loaders are a waste of time. I'll have to disagree there. We have a 16' Daniels mounted on a little Cat 914. Sure, it does less work than a pusher, but it's far more versatile. Plus, with a plow, you need far less loader than with an equal width pusher.<p>As far as that big BOSS, be advised there is no trip mechanism for that unit. The Pro-Tech has a 10&quot; rubber cutting edge and the Daniels has trip springs. I think you might need to modify that unit somewhat to make it acceptable for parking lot/commercial plowing.
     
  10. n y snow pros

    n y snow pros LawnSite Senior Member
    Posts: 252

    You can back blade with a pusher box as we do it all the time,it is not a 1 directional unit.I should have rephrased that about large plows on loaders,i am sure the daniels works great on small machines,but on a larger loader pushers seem to be more efficient.Do you use the pusher with one side closed?<p>----------<br>J PARKER<br>914-485-4200
     

Share This Page