Put UltraVac on Exmark w/ an OCDC?

Discussion in 'Lawn Mowing' started by Crapgame, Jun 16, 2004.

  1. Crapgame

    Crapgame LawnSite Member
    Posts: 26

    Hello gang,

    I have searched on this and it was not much help to me. I am looking to put an OCDC on my Lazer HP. For the fall, however, I will probably be wanting to put an UltraVac on my machine in order to suck up the leaves. Is it possible to put an UltraVac on a Lazer that has an OCDC installed without making much in the way of modification?

    I was leaning towards the director or masterchute if that makes a difference.

    Thanks
     
  2. TURFBLASTER

    TURFBLASTER LawnSite Member
    Posts: 11

    EDITED BY ADMINISTRATION - ADVERTISING NOT PERMITTED AT SITE
     
  3. MikeLT1Z28

    MikeLT1Z28 LawnSite Bronze Member
    Posts: 1,732

    i'm going to say no because the belt has to have access to the right size belt pulley (ultravac pulley bolts on top of this. i may be wrong but i'm almost positive the two won't work together.
     
  4. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Posts: 10,812

    Put the Qwikchute on with two nuts and bolts and hold it down with wing nuts. It takes like 30 seconds on and off. It also comes off in one piece.
    John

    765500res.jpg
     

Share This Page