quick 36 belts

Discussion in 'Lawn Mowing' started by lawncare18, Dec 28, 2007.

  1. lawncare18

    lawncare18 LawnSite Senior Member
    Posts: 742

    Hey guys..
    Anyone ever had any experience changing the belts on the quick 36.. I have had the mower for two years and they are starting to get worn.. long time for a belt in my opinion so I am happy. Just wondering how hard it is to swap them out? thanks guys.
     
  2. Quick36

    Quick36 LawnSite Member
    Posts: 71

    Deck Drive Belt
    1. Remove the belt guard cover.
    2. Rotate the large idler arm to the side and roll the belt off the idler pulley
    3. Remove the belt from the center pulley and from the clutch.
    4. Install new belt in reverse order making sure that it seats in both pulleys.


    Deck Belt
    1. Remove the belt guard cover.
    2. Remove the deck drive belt.
    3. Start from either side and roll the belt off the pulley.
    4. Work the belt out of all pulleys and remove.
    5. Install new belt in reverse order making sure that it seats in all pulleys.

    Note: There is a decal on 36” and 44” decks that shows belt routing.

    Note: After replacing your belts, take time to grease your spindles and idlers with a good high temp grease!
     
  3. BUCKEYE MOWING

    BUCKEYE MOWING LawnSite Bronze Member
    Posts: 1,169

    It is super easy to do ......The bottom belt will take less than 5 min to install and the top one ...less than a minute.
     
  4. lawncare18

    lawncare18 LawnSite Senior Member
    Posts: 742

    Thanks guys..
     

Share This Page