quick ? for you toro guys, and maybe exmark

Discussion in 'Lawn Mowing' started by LHLawns, Apr 29, 2004.

  1. LHLawns

    LHLawns LawnSite Member
    Posts: 24

    I've got a 2003 Toro Z Master that just hit the 200 hr. mark. On the "greasing diagram" that is posted under the foot rest it shows 2 grease fittings that are supposed to be serviced at 200 hours. I am having trouble finding these fittings. Any help would be appreciated. Also, might be the same setup for Exmark.
    Thanks.
     
  2. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Posts: 10,812

    Go to exmarks forum and ask terry. You should get an answer tomorrow.
    John
     
  3. soccerlawn

    soccerlawn LawnSite Senior Member
    Posts: 380

    On my toro Z you have to grease a fitting on the rear wheels every 200 hrs. It is easiest to prop up back of mower, pull off the wheels and grease them. It can be really difficult to try to grease them with the wheels on. It really shouldn't take long with an impact wrench to take off the wheels.
     

Share This Page