Rain-O-Mat #11

Discussion in 'Irrigation' started by irrig8r, Aug 14, 2012.

  1. irrig8r

    irrig8r LawnSite Platinum Member
    Posts: 4,535

    Friend of mine who knows I frequent lawnsite and is less computer savvy sent me this request. Anyone have specs?

    Trying to find specifications, golf rotor from the way back era. I need to replace a few on a course and it would be easier to find compatibility with specs.
    Any ideas, could you check on lawnsite please?
    thanks, Kevin
     
  2. irrig8r

    irrig8r LawnSite Platinum Member
    Posts: 4,535

  3. Mike Leary

    Mike Leary LawnSite Fanatic
    Posts: 21,795

    There seems to be a outlet in Sacramento, do a Google search.
     
  4. irrig8r

    irrig8r LawnSite Platinum Member
    Posts: 4,535

  5. irrig8r

    irrig8r LawnSite Platinum Member
    Posts: 4,535

  6. Mike Leary

    Mike Leary LawnSite Fanatic
    Posts: 21,795

  7. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,003

    I might have some catalog info, but if the head is a dual-opposing-nozzle rotor, then you can simply gage the nozzles and use the chart for an impact head.
     
  8. irrig8r

    irrig8r LawnSite Platinum Member
    Posts: 4,535

    Catalog info would be appreciated.
     
  9. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,003

    the problem with any catalog on these is that you still have to look at the actual heads, because they didn't have just one and only one set of nozzles
     
  10. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,003

    Unfortunately for the sake of sprinkler history, I usually cut up catalogs to leave only the smaller res/com products in my binder, and no golf-course stuff.

    I can strain my memory enough to get an image of the ROM golf-course head as maybe having a 3/8-inch range nozzle as standard, which would have it using around 40 gpm. I did remember the big head as a #21, though. Where's Purphaze when we need him? :(
     

Share This Page