raising the deck

Discussion in 'eXmark' started by turkp15, Aug 18, 2003.

  1. turkp15

    turkp15 LawnSite Member
    Posts: 123

    I Have a 48" Exmark Viking hydro fixed deck w/ the 16 hp vanguard. I wanted to know how I could raise the deck so the it sits @ 3" its currently at 2"
    thanks
    ~Jeff
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Jeff,

    I've attached the deck height adjustment chart from the current Viking hydro manual.

    Let me know if this is not what you were looking for.

    Thanks

    Terry
     

    Attached Files:

  3. turkp15

    turkp15 LawnSite Member
    Posts: 123

    Thanks Terry that was what I wanted. I have one more question would it be possible to get an owners manual for my Exmark Viking 48" w/ the 16hp vanguard v-twin engine I think its a 98 model?
    Thanks again,
    ~Jeff
     
  4. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Jeff,

    I hope the chart helps. The original serial number tag would have been on RH front of the engine deck near the engine. It's probably gone but you may want to check for sure. With the s/n we can make sure we get you the most accurate manual possible.

    You can e-mail the s/n and your mailing address to terry.eckert@exmark. You can also download many of the manuals in the tech support section of our website as well.

    Thanks

    Terry
     
  5. turkp15

    turkp15 LawnSite Member
    Posts: 123

    Terry the model # is v48 16bv-h
    Serial # 124892
    thanks,
    Jeff
     
  6. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Jeff,

    Send me your mailing address to terry.eckert@exmark.com and I'll have a manual sent out today.

    Thanks

    Terry
     

Share This Page