Rapco Carbide Chain

Discussion in 'Tree Service Equipment' started by Guest, Aug 27, 2012.

  1. Guest

    Guest Guest
    Posts: 0

    Hey Allen, If you need any further advice on the chain, email rick@rapcoindustries.com he should be able to help you out.
     
  2. Guest

    Guest Guest
    Posts: 0

    These chains are not going to cut as a normall chain does. You can expect to work at it. Many of these chains are designed for the fire service and venting of residential roofs. They do really well with 1/2 plywood and a set of shingles. If you put them into cutting full size wood, they tend to heat up very easy. I dont think its you, its probably the chain.
     
  3. Guest

    Guest Guest
    Posts: 0

    I bought this carbide chain from Rapco some time ago for stump work - have never been able to get it to cut worth anything. Put it on a bigger saw (066 Stihl, 20" bar), still no success. Are these chains junk or is there something I need to do that I'm not?
     
  4. Guest

    Guest Guest
    Posts: 0

    OK, I appreciate your answers.
     

Share This Page