Rear Strut Deck Adjustment

Discussion in 'eXmark' started by Redbeard, Apr 6, 2008.

  1. Redbeard

    Redbeard LawnSite Member
    from TX
    Posts: 10

    What is the proper adjustment for the rear deck "Strut Wldmt" which is adjusted by the "Sperical Rod End". This adjustment moves the deck forward/backward. The operator's manual does not mention this adjustment. This is in regards to a LAS28KA604.

    Thanks for your time.
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Redbeard,

    From the center hole of the hyme (ball joint) to the center of the tube on the strut should be 15-5/16". This shouldn't ever need adjusted unless it's been changed at sometime.

    Let us know if you have any questions.

    Thanks,
    Lenny
     
  3. Redbeard

    Redbeard LawnSite Member
    from TX
    Posts: 10

    Thanks Lenny for the specification.

    Is this adjustment setup when it leaves the Exmark factory or is this dealer adjusted during mower setup at the dealer?

    Again, I greatly appreciate your help.
     
  4. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    It is set here at the factory.

    Thanks,
    Lenny
     

Share This Page