1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Recommend stripe kit for V Ride

Discussion in 'Lawn Mowing Equipment' started by rootytalbot, Mar 20, 2013.

  1. rootytalbot

    rootytalbot LawnSite Senior Member
    Posts: 273

    What stripe can I put on a 48" V RIde?

    I guess it would have to something that would not interfere with walking behind the mower with the platform in the raised position.
  2. caseysmowing

    caseysmowing LawnSite Bronze Member
    Posts: 1,920

    Might have to make one. That's what I did. I have seen where people take a roller stripper and mount it to the back of the mower. Makes it longer though. I just used rubber and bolted to the back of the deck. I'll see how it works when the grass grows.
    Posted via Mobile Device
  3. jones68

    jones68 LawnSite Senior Member
    Posts: 453

    agree with casey.. rubber strip bolted to the back of the deck. you can use hay baler belt from tractor supply then bolt it through the deck with some large fender washers on the rubber side. i will be adding this style to my ztr and both walk behinds this year

Share This Page