Replacement cushion for seat.

Discussion in 'Hustler Turf Equip (Archived)' started by Ruben Rocha, Sep 14, 2006.

  1. Ruben Rocha

    Ruben Rocha LawnSite Senior Member
    Posts: 577

    I have a 2003 52" super mini z Model 926873
    The cushion has seperated from the seat insert on the back and seat. Is there a replacement option to change just the cushion insert and change to gray instead of black? I went online to check the parts manual but it only has the newer models and I am not sure what type of suspension seat it is.
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    The newer gray seats are a different manufacturer than the older black seats.
    You may be able to find a gray cushion from another mfg or Milsco, who made that seat for us.
    I will look and see if I can find a part # for the black seat back for your mower.

    Pj
     
  3. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    The hustler part # for the cushion is 782185
     
  4. lawnstriper23

    lawnstriper23 LawnSite Senior Member
    Posts: 324

    Ruben, check your PM because I found something that might be of help to you.........Striper
     
  5. Ruben Rocha

    Ruben Rocha LawnSite Senior Member
    Posts: 577

    Okay.
    Little confused on this. May have not given all the info.
    I have a suspension seat that has a plastic shell one piece that has a back cushion glued to the shell and a seat cushion glued to the shell. The shell comes off as one piece with the cushions. Which also has the presence switch in the seat. The cushions have separated from the back and seat and the one piece shell that the seat and back cushion that is glued to is cracked. You can take the assembly off of the suspension system as one complete unit. PJ is the part number you provided replace the whole unit or do I need to have a upholstery company re-attach the cushions? I looked at the ebay link provided by striper but it looks like it is just the vinyl cushion by itself. If that is the case how do I go about installing the new cushions on the formed shell?
     
  6. gps_jetskier

    gps_jetskier LawnSite Senior Member
    Posts: 303

  7. captken

    captken LawnSite Bronze Member
    Posts: 1,707

    Are those the numbers for the seat bottom cushion and the seat back cushion?

    I need the replace both the seat back and bottom cushion. Mine is pulling apart and cracking. The machine still performs as well as it always did. I also need to replace a right side arm rest.

    How much are they going to cost?
    kenny.
     
  8. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    Ruben Rocha, captken,
    Is this the seat you are talking about?
    .
    [​IMG]
     
  9. captken

    captken LawnSite Bronze Member
    Posts: 1,707

    yeah, that looks like my seat. Part numbers for the armrest too, please.

    kenny
     
  10. Ruben Rocha

    Ruben Rocha LawnSite Senior Member
    Posts: 577

    PJ,
    Looks very similar. Here is a picture of mine.

    IMGP0012.JPG

    IMGP0014.jpg
     

Share This Page