1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Replacing lazer z pto clutch

Discussion in 'Mechanic and Repair' started by Thunderbolt, May 10, 2009.

  1. Thunderbolt

    Thunderbolt LawnSite Member
    Posts: 91

    Hi all, How hard is it to replace the pto clutch on a Lazer Z with a 27hp Kohler? :)
     
  2. Thunderbolt

    Thunderbolt LawnSite Member
    Posts: 91

  3. Thunderbolt

    Thunderbolt LawnSite Member
    Posts: 91

    Anybody?:confused:
     
  4. Breezmeister

    Breezmeister LawnSite Bronze Member
    Male, from South Jersey
    Posts: 1,458

    It's not hard once you get the hardware out of the way, take the belt off, and the bolt off, wire disconnected. If you are lucky, you can just pull it off.
    If you are not lucky, you might have to pry it off
     
  5. Thunderbolt

    Thunderbolt LawnSite Member
    Posts: 91

    Thanks for the info:)
     
  6. mowerknower

    mowerknower LawnSite Senior Member
    Posts: 766

    Yep, if it slides right off its easy. If its seized to the crank it can get a little more difficult. Just remember, you are replacing the clutch so dont be afraid to destroy it.
     

Share This Page