Restricted access!

Discussion in 'Tree Service Equipment' started by Guest, Sep 26, 2008.

  1. Guest

    Guest Guest
    Posts: 0

    There is a button at the top of the page that is a link to the BMA website. Go check it out.
     
  2. Guest

    Guest Guest
    Posts: 0

    I haven't used one of these grinders, but I found a link to their dealer locator that I thought I would post for you - www.alpinemagnum.com/dealer.htm

    You may have already tried this but figured I'd post it for you anyway :waving:
     
  3. Guest

    Guest Guest
    Posts: 0

  4. Guest

    Guest Guest
    Posts: 0

    IMO, its one of the fastest machines in the world, and its lighter and smaller, standart teeth, , ,
     
  5. Guest

    Guest Guest
    Posts: 0

    Dingo now has a stump grinder attachment and my 525 TX will go thru a 35 inch opening approx. Branch Manager Attachments has a aftermarket attachment that has it's own power unit and looks nice. I am going to demo the Dingo unit soon. It runs on hydraulics. BMA Has a video on another thread on the board somewhere.
     
  6. Guest

    Guest Guest
    Posts: 0

    They have a very good reputation. (BMA)
     
  7. Guest

    Guest Guest
    Posts: 0

    Hi all,

    As you might of heard accross the pond the tiny island called the UK has a re-occuring problem .......Restricted access everywhere!!!!:eek:

    Unlike you guys - good access into back yards for us is 34-36"!!! a most and usually about 28/30"!!!

    I have been searching around for some time for a small access stump grinder that is quite productive - yeah there are small engined grinders out there but they dont seem to do the job well enough. I currently run two vermmer machines sc252 & sc352.

    I have been looking at a grinder called an Alpine magnum that run off a saw power unit, i have yet to find the dealer for the uk to arrange a demo.

    Has anyone got one of these grinders and if so is it any good?

    Andy.
     
  8. Guest

    Guest Guest
    Posts: 0

    Thanks for that Mike - we do have a single dealer/importer that i have tried to contact more than a dozen times and have had no feed back at all!!

    Just wanted to know if they are worth buying.

    Has anyone got any other sugestions??

    Andy.
     
  9. Guest

    Guest Guest
    Posts: 0

    Thanks - i will find out if we have a dealer over here in the uk!! What is the productivity of these machines? Are they similar to something like an RG30 Rayco mini work force?

    Andy.
     
  10. Guest

    Guest Guest
    Posts: 0

    Thanks Treevet,

    I do like the idea of this machine as it does give me an option of a compact loader as well as a grinder. I will look further into this as well as treegals suggestion.

    The more suggestions the better!!!!

    Andy.
     

Share This Page