1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

retaining wall with obtuse angle

Discussion in 'Hardscaping' started by shelbymustang616, Sep 27, 2011.

  1. shelbymustang616

    shelbymustang616 LawnSite Member
    Posts: 117

    I have a 115 sq ft retaining wall a client wants built. The wall holds up a wall of soil heading down cellar stairs. The old wall is still there but is a mortared cinderblock wall. This is coming down and a concrete block wall is going up. The wall I have to put in has an obtuse angle maybe 120*. i have done rounded corners and 90* corners but never anything else. My question is how do i stagger that joint as I build up? Thanks
     
  2. DVS Hardscaper

    DVS Hardscaper LawnSite Fanatic
    Posts: 6,403

    Just Work it as you go.
    Posted via Mobile Device
     
  3. zedosix

    zedosix LawnSite Silver Member
    Posts: 2,628

    Cut the blocks to the 120 deg angle then ball peen the edge. No biggie.
     
  4. STL Ponds and Waterfalls

    STL Ponds and Waterfalls LawnSite Bronze Member
    Posts: 1,177

    Is it going to be a srw wall or a veneered wall?
     
  5. shelbymustang616

    shelbymustang616 LawnSite Member
    Posts: 117

    single sided wall from CST building products. any body have any pictures?
     

Share This Page