running doubles

Discussion in 'Hustler Turf Equip (Archived)' started by musselman, Feb 16, 2007.

  1. musselman

    musselman LawnSite Senior Member
    from utah
    Posts: 301

    I have a 60 in deck, is there a bracket that can be used to run double blades or any suggestion to chop things up a bit better instead of going over it twice. Thanks... BTW if there is a bracket whats the part #
     
  2. Accu-cut Lawn Care

    Accu-cut Lawn Care LawnSite Bronze Member
    Posts: 1,206

    I'd like to know about this too...60"xr-7.
     
  3. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,760

    We do not offer a bracket for running double's.
    As to getting it to cut the clippings finer, I would try running some Gator's on there.
    We do offer the Gators for the XR-7 deck now, for the 60" the part # is 794230
     
  4. Jeds_Lawn_Care

    Jeds_Lawn_Care LawnSite Senior Member
    Posts: 304

    Dixie Chopper makes a bracket, look into it. It fits 2 and 1/2" blades
     
  5. cclllc

    cclllc LawnSite Senior Member
    Posts: 903

    I just put a set of "x" blades on our super z.The cut is amazing.I have been running doubles on my choppers for years and thought I'd give them a try on the z.
     
  6. cclllc

    cclllc LawnSite Senior Member
    Posts: 903

    you don't need a bracket if you use the chopper x-blades.
     
  7. fireman9

    fireman9 LawnSite Member
    Posts: 172

    Gator magnum G6's way more lift then stock hustler blades. Working great for me so far...
    Diesel Z 60" XR-7
     

Share This Page