Scag 61" Advantage Deck

Discussion in 'Marketplace' started by schulte, Nov 27, 2009.

  1. schulte

    schulte LawnSite Member
    Posts: 23

    Got an extra Scag 61" Advantage deck (complete). This is a shaft drive deck. Model is SMT-61A, serial is 857XXXX.

    This is basically brand new; was used a few times and then put into storage. Complete deck with belts, etc. Has a little rust under the deck and is missing some paint (underneath only) but is otherwise in perfect shape.

    Too big to ship (unless you want to pay freight). Local pickup in Madison, CT; exit 62 off of I-95, about 20min outside of New Haven, CT.

    Make me an offer, just looking to get rid of this.

    Will post some pics tomorrow.
     
  2. supercuts

    supercuts LawnSite Silver Member
    Posts: 2,784

    how much do you want?
     
  3. schulte

    schulte LawnSite Member
    Posts: 23

    Asking $1,100, but I'll consider any offer.

    Here're some pics; as you can see, its in pretty good shape. I have a brand new tension spring for it; not pictured, but included. Also includes the parts in the picture; caster yolk also.

    adv5 (Small).jpg

    advantage 4 (Small).jpg

    advantage 3 (Small).jpg

    advantage 2 (Small).jpg

    advantage 1 (Small).jpg
     
  4. supercuts

    supercuts LawnSite Silver Member
    Posts: 2,784

    do you have 2 of those casters?
     
  5. schulte

    schulte LawnSite Member
    Posts: 23

    Do you mean the caster yolk?

    I only have the one in the picture (no wheel included), but if you buy the deck and need another (I believe the one I have is the left side), I can get you the right side one (just the extension welded piece, not the yolk itself) that you'd need to put this on a machine that had a different size deck for another $60 (brand new).
     
  6. supercuts

    supercuts LawnSite Silver Member
    Posts: 2,784

    its for a project, how much do you want for the one caster yolk?
     
  7. schulte

    schulte LawnSite Member
    Posts: 23

    Whole thing, including both weldments, bearings, etc? $100 (or make me an offer).
     
  8. supercuts

    supercuts LawnSite Silver Member
    Posts: 2,784

    ill be in madison this afternoon, call my cell 203-605-5658 mark
     
  9. CAG80

    CAG80 LawnSite Member
    from CT
    Posts: 43

    Dont want to lowball you on the deck.. I wouldnt mind bolting a new one on my machine instead painting my old one and have some more spare spindles. Im from the area with cash in hand if interested.
    Thanks
     
  10. schulte

    schulte LawnSite Member
    Posts: 23

    Send me a message with your email or phone number and I'll get in touch!
     

Share This Page